10-31-2020, 08:41 AM
I just remembered something from the time when I first did the install. I had a problem, can't remember which setting, where the ACP/ezGallery form had a permission checked, but that permission was not checked at the tabular level. No amount of checking or unchecking in the form changed the table.
I am wondering if that is what is happening now. Here is a snap shot of the tabular level settings:
![[Image: ezg_config2.png]](https://www.ponybytes.com/ezg_config2.png)
Registered is group 2 and Judges is group 10. From what I am seeing, neither of the "auto" settings is correctly ticked for either of these groups. Registered should be "1" in the "autoapprove" column" and Judge should be "1" in the "autocomment" column, but both are "0." Perhaps you will say the same.
I am wondering if that is what is happening now. Here is a snap shot of the tabular level settings:
Registered is group 2 and Judges is group 10. From what I am seeing, neither of the "auto" settings is correctly ticked for either of these groups. Registered should be "1" in the "autoapprove" column" and Judge should be "1" in the "autocomment" column, but both are "0." Perhaps you will say the same.